Viewing Flood Zones in ArcGIS Explorer, Part 2
This is a continuation of my last post about different ways to access flood zone data for the non-ArcGIS Desktop user.
Method 4: DFIRM Shapefiles
Digital Flood Rate Insurance Maps are available to download from FEMA for $10. They’ve offered a few free samples and Fairfax City happens to be one of them.
The data comes in several formats including shapefile. ArcGIS Explorer can read shapefiles. However, it will not let you add them to your map unless they have a defined projection.
The shapefiles in the Fairfax City DFIRM that I downloaded didn’t have their projections defined. I would assume this is the case with all of them. Luckily, they tell you the projection in the metadata. And luckily, projections can be defined with a file you can create using any text editor.
To find the projection, open the _metadata file in the Document folder. If you scroll down about 2/3 of the way you’ll find the Spatial_Reference_Information section. The most important parts are the Grid_Coordinate_System_Name, UTM_Zone_Number, and Horizontal_Datum_Name. The Fairfax City DFIRM is in Universal Transverse Mercator (UTM) Zone 18, NAD 1983 datum.
I used that information to have ArcGIS desktop create a projection definition file in the format used by all ESRI GIS software (including ArcGIS Explorer). It looks like this:
PROJCS["NAD_1983_UTM_Zone_18N",GEOGCS["GCS_North_American_1983",DATUM["D_North_American_1983",
SPHEROID["GRS_1980",6378137.0,298.257222101]],PRIMEM["Greenwich",0.0],UNIT["Degree",0.0174532925199433]],
PROJECTION["Transverse_Mercator"],PARAMETER["False_Easting",500000.0],PARAMETER["False_Northing",0.0],
PARAMETER["Central_Meridian",-75.0],PARAMETER["Scale_Factor",0.9996],
PARAMETER["Latitude_Of_Origin",0.0],UNIT["Meter",1.0]]
All you need to do is copy and paste that text into a text editor, remove any spaces, then save it as a .prj file. The name before the file extension should match the shapefile you are trying to use. The main DFIRM shapefile is S_Fld_Haz_Ar.shp, the flood hazard zone areas. So the projection definition file should be called S_Fld_Haz_Ar.prj
If you don’t want to copy and paste you can download it and put it the same folder with the shapefile.
FEMA uses UTM for all of its DFIRMs, but they do not always use the same datum. If you download a different one from Fairfax City, you will need to check the metadata for the UTM Zone Number and whether the datum is NAD 1983 or NAD 1927. If it’s NAD 1983, you can use the same text from above as a template to create your .prj file. Just change the two red areas to match what the metadata says:
PROJCS["NAD_1983_UTM_Zone_18N",GEOGCS["GCS_North_American_1983",DATUM["D_North_American_1983",
SPHEROID["GRS_1980",6378137.0,298.257222101]],PRIMEM["Greenwich",0.0],UNIT["Degree",0.0174532925199433]],
PROJECTION["Transverse_Mercator"],PARAMETER["False_Easting",500000.0],PARAMETER["False_Northing",0.0],
PARAMETER["Central_Meridian",-75.0],PARAMETER["Scale_Factor",0.9996],PARAMETER["Latitude_Of_Origin",0.0],UNIT["Meter",1.0]]
If it’s NAD 1927, use this template and change the red areas
PROJCS["NAD_1927_UTM_Zone_17N",GEOGCS["GCS_North_American_1927",DATUM["D_North_American_1927",
SPHEROID["Clarke_1866",6378206.4,294.9786982]],PRIMEM["Greenwich",0.0],UNIT["Degree",0.0174532925199433]],
PROJECTION["Transverse_Mercator"],PARAMETER["False_Easting",500000.0],PARAMETER["False_Northing",0.0],
PARAMETER["Central_Meridian",-81.0],PARAMETER["Scale_Factor",0.9996],PARAMETER["Latitude_Of_Origin",0.0],UNIT["Meter",1.0]]
(Remove any line breaks that I’ve entered for readability).
Now, Go to the Add Content button and select Shapefiles… Then browse to the ArcShapes folder and add S_Fld_Haz_Ar.shp. The shapefile starts out looking like this…
…which isn’t very helpful, but just wait. If you right click on the layer in the Contents window, you can change the symbol to something with edges. Now you will be able to see the flood zone borders.
And, if you right click on the layer again and this time bring up the Properties window, you will be able to select certain attributes to show as Popup Content.
(click on the image to see full size)
When you open this dialog box, a list of all the available attributes will come up. You will be able to select which ones you want to appear in a little pop-up window whenever you click on a feature. I picked all of them. Then, in the bottom half of the box you can select one attribute that will appear whenever you hover over a feature with your mouse. I picked FLD_ZONE because this is the most important piece of information. Now, if I type the address of City Hall into the Find box and press enter, I have everything I wanted at the beginning.
There’s a “you are here” symbol, and if I mouse-over I see it’s located in Zone X (not Flood Zone). I can mouse over other areas to see where the nearest 0.2 pct annual chance flood hazard zone is. And if I click in the zone, I can get any more information that exists about it.
Knowing how to use shapefiles in ArcGIS Explorer opens up a world of information. You can watch a free basic overview of the software at http://blogs.esri.com/Support/blogs/esritrainingmatters/archive/2009/12/03/explore-arcgis-explorer-in-a-free-training-seminar.aspx
Tags: ArcGIS Explorer, attribute table, coordinate system, DFIRM, flood zone, shapefile
September 30th, 2010 at 11:17 am
Good day, Aubrey…in my flood may attribute layer my ZONE is denoted by a number and not a letter….does that number in any way identify exactly which flood zone my pointer is in…for example I have a map detail which says ZONE: 06.66. What I usually look for are the flood zone designations…for example… ZONE: AE. Could you help me out with exactly what those numbers mean; I don’t know what flood zone that is. Thanks for your assistance with this…you can contact me at merrymd@doacs.state.fl.us